LED" title="LED">LED" title="LED">LED驱动器应用,可调整关断时间,源250mA/沉500mA峰值驱动能力, 25°C时的电流检测精度±3.2%,3.3V电平调光输入,具有热
压膜电感器制造商关断,过流保护和最大开态时间保护,主要用于LCD屏的LED背光驱动器,LED条灯,LED街灯和LED灯泡.本文介绍了NCL30051主要特性,方框图, 典型应用电路图, 输入80V 350mA输出的降压LED驱动器评估板NCL30105GEVB电路图,材料清单和PCB布局图.
The NCL30105 is a peak current controlled fixed off time buck controller designed for LED driver applications. It
绕线电感is optimized to operate in deep continuous conduction mode eliminating the need for output electrolytic capacitors. Featuring an adjustable off time generator, the controller can drive a MOSFET up to a switching frequency of 500 kHz. A dedicated dimming pin enables the use of a pulsewidth modulat电感器图ed logic signal to dim the LED directly. The soft-start pin creates a startup sequence that slowly ramps up the peak current and enables the adjustment of the peak current set point for analog dimming control. The device features robust protection features to detect switch overcurrent faults and to detect maximum on time events.
NCL30051主要特性:
• Constant Off Time Current−Mode Control Operation
• Adjustable Off Time (0.5 [1]s to 10 [1]s)
• Internal Leading Edge Blanking
• Source 250 mA / Sink 500 mA Peak Drive Capability
• ±3.2% Current Sense Accuracy at 25℃• Internal Startup Delay
• 3.3 V Logic Level Dimming Input
• This is a Pb−Free Device
NCL30051安全特性:
• Thermal Shutdown
• Maximum On Time Protection
• Overcurrent Protection
NCL30051典型应用:
• LED Backlight Drivers for LCD Panels
• LED Light Bars
• LED Street Lighting
• LED Bulbs

图1.NCL30051方框图

图2.NCL30051典型应用框图

图3.NCL30051典型应用电路图

图4. 评估板NCL30105GEVB外形图:输入高达80V,输出350mA

图5. 评估板NCL30105GEVB电路图(1)

图6. 评估板NCL30105GEVB电路图(2)
评估板NCL30105GEVB材料清单:


图7. 评估板NCL30105GEVB元件布局图:顶层

图8. 评估板NCL30105GEVB元件布局图:底层
详情请见:
http://www.onsemi.cn/pub_link/Collateral/NCL30105-D.PDF
和
http://www.onsemi.cn/pub_link/Collateral/NCL30105GEVB_SCHEMATIC.PDF
大功率电感厂家 |
大电流电感工厂
数字中频式频谱仪的分辨率带宽设计 频谱分析仪按实现方式可分为模拟式和数字式两种,前者以模拟滤波器为基础,后者则以数字滤波器和FFT分析为基础。相比之下,模拟式频谱分析仪不能获得实时频谱,且由于模拟滤波器会受到非线性、温漂、老化等影响
功率电感用于单片机的数控开关电源设计(下) 3.1 EMI滤波电路 EMI滤波器如图3所示电路。该滤波器有两个输入端、两个输出端和一个接地端。电路包括快速保险丝F1,泄放电阻R1,共模电感L1、L2,滤波电容C1、C2、C8、C9。泄放电阻R
基础课堂 薄膜晶体管原理知识简析 首页 >电子元器件基础课堂 薄膜晶体管原理知识简析2015-11-13 09:34来源:电源网综合作者:柚子晶体管原理知识对于刚刚开始接触电子电路设计的新人工程师来说,是非常重要的。薄膜晶体管作为一